The Retrotouch Range is a unique range of touch and remote light switches and wall sockets, with modern stylish looks to compliment and enhance your home. RetroTouch switches have a glass surround with chrome trim and a Microline Touch Glass Panel. The range can be operated by touch, or by wireless remote control (radio signals up to 20m). The RetroTouch range comes in a variety of designer styles and colours, uses existing wiring (nothing clever needed) and uses concealed screws (no ugly screws visible). Available as touch and/or remote control and suitable for on/off lights and dimmable lights.

FAQ's 

• Due to the electronics within the light switch, a 35mm depth box is recommended. The RTS2005 range require less depth, and at a push can be fitted into 25mm back boxes, but this is tight and will only leave about 5mm for the wires.

• No, only the RTS 2030 range are dimmers, and can be controlled by small remote.

• Yes, the touch light switches use RF (Radio Frequency) technology up to 20 meters.

• Yes - please see each individual range for full list of what is available.

• The RTS 2020, 2030 & 2040 ranges uses Radio Frequency and will not interfere with WiFI, Bluetooth or infrared signals as they are on a different frequency.

• No, each individual remote is code locked to ensure that only the pre-programmed remote works with that particular switch.

• The remote may not be syncronized with the touch light switch, please follow the instructions (included in box) to pair the two together again.

• Yes, you can buy additional mini remotes to be able to have one upstairs and one downstairs giving you the 2 way function remotely.

• The Scene remote control only works with RTS 2020 and RTS 2040 range and can control up to 19 gangs and up to 6 scenes up to a distance of 50m.

• If you have more than 2 or 3 light switches, the scene remote gives you the ability to turn all lights ON or OFF, or set scenes (ie. certain patterns of lights on or off) or individual lights on/off same as mini remote.

• Each Dimmer RTS 2030 switch comes with its own remote, this can also be programmed to control an additional 3 dimmer switches using the select button. Simple to follow instructions are included.

• No, all our switches and sockets use exactly same wiring as you already have, saving you time and most importantly money. 

• Yes both our single and double sockets are a standard size.

• All electrical wiring must be done by qualified electrician or similarly qualified person. Instructions enclosed within the box to fit the switch, Always employ a qualified person to avoid damage to the product and for your safety.

• The Touch panel shall last for well over 100,000 touches (Approx 54 years turning on/off 5 times a day).

• All our products come with a 1 year warranty from date of purchase, if there is a fault please contact us.

• We will always replace faulty switches if within warranty. Please see our terms and conditions.

• Yes, the RTS 2020, 2010, 2005 and 2040 range of light switches are compatible with on/off energy saving bulbs and standard incandescent bulbs.

• With all our light switches they have a glass touch panel which requires little pressure to turn on or off your lights, with the added benefit of remote control so no need to get up.

• Yes, all the touch light switches lightly glow at night, so no more fumbling for the light switch and uses minimal power consumption <0.02W. They do not intrude on your sleep as some neon's do, they are dim but bright enough to locate at night.

• Our switches are not IP44 rated for bathroom use. Although no IP rating required for Zone 3.

• The RetroTouch range do not require a neutral wire/connection (with the exception of the RTS2020 2 way and the RTS2010 2 way switches) - put the permanent live wire (usually blue) in the 'IN' inlet and the switched wire to the light (usually brown) in the 'OUT' outlet. Please note that all electrical wiring should be carried out by a competent electrician.

• This can sometimes happen when the L and L1 (switched and switched live) are installed the wrong way round. The switch will still work, but there will still be power surging to the switch which can cause flickering when off. This is especially applicable when using a low energy bulb. Simply swapping the wires round should fix this problem.

• Yes you can. Each RetroTouch remote control switch has the capability to remember the frequency of up to 4 different remote control handsets. So you could for example use the remote fob that comes with the switch, plus another secondary fob, plus 2 scene remote controllers.